Best Black Friday Dishwasher Deals

Best Black Friday Dishwasher Deals: The Short Answer

Sort every Black Friday dishwasher deal by six numbers — place settings, dBA, rack adjustability, kilowatt-hours and gallons per cycle, cutout dimensions, and expected service life — and the 2026 field splits into four clean bands: premium quiet machines in the low 40s dBA that almost never discount below $800, mid-range workhorses in the $550–$850 window that carry most of the real savings, value models under $550 where the discount is small but the entry price is low, and compact, ADA-height and panel-ready machines that discount the least because fewer units are made. If you want the one-line version: buy the quietest machine you can afford that fits your cutout, has a third rack you will actually use, and comes with a stainless tub and a stainless inner door. Everything below explains how to apply that to your kitchen.

The Six Criteria That Decide Whether a Dishwasher Deal Is Actually Good

A discounted dishwasher is only a bargain if it matches how you load and where it sits. The six factors below are the ones that change daily satisfaction far more than the badge on the door.

1. Capacity: place settings versus the dishes you actually own

Place settings are a standardized count, not a real-world measure. A machine rated at 14 place settings will hold roughly 14 dinner plates, 14 salad plates, 14 glasses, 14 cups and 14 sets of flatware — if you load it the way the rating lab did. Real loads mix in serving bowls, sheet pans, blender jars and a stockpot, which is why a 16-setting machine often feels like it holds twice what a 12-setting machine does. The number that matters more is usable rack geometry: how wide the tine spacing is, how tall the upper rack sits when raised, and whether the lower rack has a deep section for a 12-inch skillet. If you cook from scratch most nights, look for at least 14 place settings and a lower rack that accepts a 13-inch pan lying flat.

2. Noise rating: what dBA actually sounds like

Dishwasher noise is measured in A-weighted decibels, and the scale is not linear in perception. Roughly a 10 dBA jump reads as twice as loud, so the gap between a 42 dBA and a 52 dBA machine is enormous in practice. Under about 44 dBA you can hold a conversation at the counter while it runs. Between 45 and 48 dBA you will hear it in the next room but can watch television over it. Above 50 dBA you will schedule cycles around it.

3. Rack flexibility: the feature you feel every single day

Rack design separates a frustrating machine from a pleasant one. Look for four things. First, fold-down tines — at least four rows in the lower rack so you can convert plate slots into open space for pots. Second, an adjustable upper rack with two height positions, which gives you roughly 2 inches of extra clearance when you need to fit tall stemware or a stockpot below. Third, a third rack, but note the type: a shallow half-depth rack takes only utensils and knives, while a full-depth rack with its own spray arm takes small bowls, ramekins and lids and is worth considerably more. Fourth, a removable silverware basket that splits into two pieces, so a half load still uses a full basket position.

4. Energy and water use: the number that repeats every week

Efficiency standards have tightened repeatedly, so a machine bought today uses roughly a third of the water and about half the electricity of a 1990s model. The practical spread in 2026 is still wide enough to matter over ten years.

Two caveats. Heated dry adds roughly 0.3–0.5 kWh per cycle and is the single biggest lever you control; the same machine run on air dry drops a full tier. Sanitize rinse pushes final rinse water to about 150–160°F and adds roughly 0.2–0.3 kWh, which is fine for baby bottles and cutting boards but wasteful as a default. Look for the Energy Star mark — current thresholds sit around 270 kWh per year and 3.5 gallons per cycle for standard-size machines, and around 203 kWh and 3.1 gallons for compacts — and check whether your utility offers a rebate, commonly $25–$75 for qualifying models.

5. Installation requirements: the part that eats the discount

Dishwasher installation is where a $200 Black Friday saving can evaporate. Most 24-inch built-ins arrive without a power cord and are meant to be hardwired into a junction box behind the toe kick; some brands sell a plug-in cord kit separately for roughly $25–$40. You need a dedicated 120-volt, 15-amp circuit — the heating element alone can pull 10–12 amps — and a hot water supply line, typically 3/8-inch compression, at a minimum of about 120°F. Drainage must high-loop at least 20 inches above the floor before it enters the disposal or a standpipe, or pass through an air gap if your local code requires one. If you are replacing a machine that was connected to a disposer, remember the knockout plug in the disposer inlet has to be removed or the dishwasher will not drain.

One more measurement people forget: the delivery path. A standard 24-inch dishwasher ships in a carton around 26 in wide by 26 in deep by 36 in tall and weighs 90–120 lb boxed. A 30-inch interior doorway clears it easily, but a 28-inch hallway turn or a tight stairwell landing does not. Measure the narrowest point on the route before you choose delivery-plus-installation over a box drop at the curb.

6. Expected long-term value: service life, not sticker price

Dishwashers generally last about nine to ten years, and the components fail in a predictable order. Knowing what wears first tells you whether a cheap machine is genuinely cheap.

Apply the 50 percent rule: if the repair quote exceeds half the price of a comparable new machine and the unit is seven years old or older, replace it. A stainless-steel tub is the single strongest predictor of a long life — plastic tubs discolor, hold odors and crack at the sump flange sooner. Stainless inner doors matter too, because the inner door takes the steam and detergent spray directly.

Decision Matrix: Match the Deal to Your Household

Premium Quiet Deals (38–44 dBA)

This band discounts the least in percentage terms because demand outstrips supply, but the absolute savings are still the largest. Expect $100–$250 off list during Black Friday week, with the deepest cuts on the previous model year.

Bosch 800 Series

The 800 Series is the reference point for quiet performance, sitting at roughly 42 dBA on the standard cycle and using a mineral desiccant drying system rather than a heating element, which is why plastics come out genuinely dry. Capacity runs about 16 place settings with a full-depth third rack that has its own spray arm, and the upper rack adjusts through two positions. Energy use lands around 1.0 kWh per normal cycle with water in the 3.3-gallon range. Installation is the standard 24-inch cutout with a hardwired junction box; a plug-in cord kit is sold separately. Expect $900–$1,150 on sale against a list price that sits closer to $1,200–$1,400. The long-term value case is strong: stainless tub, stainless inner door, and parts availability that stretches well past the ten-year mark. Best for open-plan homes and anyone who runs the dishwasher after dinner while watching television.

Bosch 500 Series

A step down in drying technology and a step down in price, the 500 Series runs around 44 dBA and uses a condenser-plus-fan drying approach rather than the mineral system. You give up some plastic drying performance and the third rack is a shallower design on most configurations. Capacity is comparable at roughly 16 place settings, and energy use is similar at about 1.0 kWh per cycle. On Black Friday these typically land in the $750–$900 range. If the 800 Series is out of budget, this is the closest you get to its noise floor without paying the premium, and it is the machine to buy when your kitchen opens onto a living room but you cannot stretch to four figures.

Bosch 300 Series

The 300 Series is where most buyers should look first. It holds about 14 place settings, runs at roughly 44 dBA, uses a hybrid drying system and carries a stainless tub. You lose the third rack on many configurations and the rack tines are less adjustable. Energy use is in the 1.0–1.1 kWh range. Black Friday pricing usually falls to $550–$700. It is not the quietest machine Bosch makes, but it is close enough that the difference disappears behind normal household noise, and it keeps the stainless tub that drives long-term durability.

Bosch 100 Series

The entry point into the brand, the 100 Series runs around 50 dBA — noticeably louder, and the machine you will schedule rather than run during dinner. It still uses a stainless tub on most configurations, holds about 14 place settings, and lands near $500–$620 on sale. Buy it if you want the brand’s reliability and parts network and your kitchen is separated from living space by a wall or door. Skip it if your dishwasher sits within earshot of a sofa.

Miele G 5000 Series

Miele machines are built around a 20-year design life and use a completely different architecture: a sealed, self-cleaning filtration system, a stainless cabinet, and a basket system that is unusually adaptable. The G 5000 line typically runs in the low-to-mid 40s dBA and offers a built-in water softener on many configurations, which is the feature to hunt for if you have hard water. Energy use is excellent, often under 0.9 kWh per cycle. Black Friday movement is modest — often $100–$200 off rather than deep cuts — and prices sit around $1,100–$1,500. The value argument is not the discount; it is the service life and the fact that Miele stocks parts for far longer than most competitors.

Miele G 7000 Series

The flagship line adds an automatic detergent dispensing system, a faster cycle set, and noise ratings in the low 40s dBA. It also brings the strongest drying performance in the category thanks to a door that opens automatically at the end of the cycle. Pricing runs roughly $1,500–$2,100, and Black Friday discounts are typically small. This is a ten-to-fifteen-year purchase, not a deal-hunting purchase — buy it when quiet, dry dishes and long parts availability matter more than the invoice.

Cove Dishwasher (Sub-Zero Group)

Cove is the quietest mainstream option, advertised in the high 30s to low 40s dBA, with a stainless tub and a wash system built around two spray arms and a filtration design borrowed from commercial kitchens. Pricing sits around $2,100–$2,600 with very little seasonal movement. Panel-ready configurations are common, which makes it a natural fit for custom cabinetry. Buy it if you are already specifying Sub-Zero or Wolf appliances and want a matching service network; otherwise the price per place setting is hard to justify.

Thermador Sapphire and Emerald Series

Thermador’s dishwasher lines sit at roughly 42–44 dBA with a stainless interior, a third rack on most configurations, and a distinctive star-shaped wash system with an extra spray point at the back. Capacity reaches 16 place settings. Pricing runs $1,300–$2,000, and Black Friday discounts come mostly through dealer bundles when you buy two or more Thermador appliances. The practical reason to buy one is the integrated look and the bundle rebate, not the standalone discount.

Asko Dishwashers

Asko builds machines with a stainless interior and exterior, a 42–44 dBA rating on quiet models, and unusually heavy-duty rack hardware. The distinguishing feature is a self-cleaning filter system and a very long service-life design philosophy, along with a line of professional-style machines. Prices sit around $1,200–$1,700. Discounting is limited. Buy it if you want commercial-grade construction and do not mind a smaller dealer network.

Mid-Range Deals ($550–$900)

This is where Black Friday does its best work. These machines carry most of the features people actually want — third racks, bottle jets, sanitize cycles, stainless tubs — and they discount 20–30 percent because the brands compete hard for the volume buyer.

KitchenAid FreeFlex Series

The FreeFlex rack system is the reason to buy: the upper rack adjusts and the tines fold in ways that let you convert the whole lower rack into open space for a stockpot or a sheet pan. Noise sits around 44 dBA, capacity around 14–16 place settings, and there is a full third rack with its own wash tube. Drying is element-based, so plastics benefit from a rinse aid. Energy use is roughly 1.0–1.1 kWh per cycle. Black Friday pricing typically lands at $700–$900 against a list of $950–$1,150. The stainless tub and inner door, plus extended limited coverage on the control board and motor in years two through five, make this a strong long-term pick.

KitchenAid ProWash Quiet Series

The quieter KitchenAid models dip into the high 30s to low 40s dBA, putting them in genuine premium territory at a mid-range price. You get a stainless tub, a third rack, a bottle-wash spray jet, and a soil sensor that adjusts cycle length. Energy use runs about 0.9–1.0 kWh per cycle. Expect $850–$1,100 on Black Friday. This is the machine to buy when you want near-silent operation but cannot justify Miele or Cove pricing.

LG QuadWash Series

LG’s QuadWash models use four spray arms, including a rotating multi-motion arm, and typically run at 44 dBA on the quiet cycles with a capacity of around 14–15 place settings. Many configurations include a third rack and a steam pre-wash option that helps with baked-on food. Energy use is about 1.0–1.2 kWh per cycle. Black Friday pricing usually sits at $550–$750. The value story is feature density per dollar, and the caution is that plastic tubs appear on the cheapest configurations — pay the small premium for stainless.

LG TrueSteam Series

The step-up LG models add a genuine steam generator that raises the interior temperature before the wash cycle, which noticeably improves results on casseroles and dried egg. Noise lands in the low 40s dBA, capacity around 15 place settings, and a third rack with a spray arm is standard. Energy use is around 1.0 kWh per cycle with water in the 3.5-gallon range. Black Friday pricing tends to land at $700–$900. Good for households that cook heavily and load dirty pans rather than rinsing first.

Samsung AutoRelease Door Series

The defining feature here is a door that pops open a few inches at the end of the cycle, letting steam escape and dramatically improving drying without a heating element. Noise sits in the low 40s dBA, capacity is about 14–15 place settings, and most configurations include a third rack and a sanitize cycle. Energy use is roughly 0.9–1.1 kWh per cycle. Black Friday pricing lands around $650–$900. It is the best drying value in the mid-range band if you dislike towel-drying plastic containers.

Samsung Standard Series

The lower Samsung tier runs about 44 dBA, holds 14 place settings, and covers the basics competently — stainless tub on most configurations, a height-adjustable upper rack, a sanitize option. Expect $500–$700 on Black Friday. The trade-offs are a shallower third rack on some builds and less rack adjustability than the premium tier. It is a reasonable buy when the price is the deciding factor and you are not chasing silence.

GE Profile with Steam and Sanitize

GE Profile machines run around 45 dBA, hold about 16 place settings, and pair a steam pre-wash with a sanitize cycle — a combination that works well for households with babies or immune-compromised family members. Many configurations include a full third rack and a bottle-wash jet. Energy use sits near 1.0–1.2 kWh per cycle. Black Friday pricing typically lands at $650–$850. The rack design is the standout: deep tine adjustability and a lower rack that handles a 13-inch pan without removing a row.

GE Profile Panel-Ready

The panel-ready version of the same platform carries the same wash system with a custom-door option, letting you match cabinetry exactly. Noise and capacity figures are comparable, and installation adds a small complication: you need the panel and handle kit, usually $150–$350 extra, plus precise cabinet dimensions. Black Friday pricing runs $750–$950 for the appliance before panels. Buy it if you are already mid-renovation and the cabinetry is custom; skip it if your cabinets are standard and finished.

GE Standard Series

GE’s mainstream line runs about 48–50 dBA with 14–16 place settings depending on configuration, a stainless tub on most models, and a basic third rack on some. Black Friday pricing sits at $450–$650. It is a dependable, widely serviced machine and an easy choice for a rental property or a second home where noise is not a priority.

Whirlpool Top-Control Series

Whirlpool’s mid-tier machines run about 47 dBA, hold 14–15 place settings, and offer a sensor cycle plus a sanitize option. The notable feature is a very straightforward control layout — useful if you dislike touch panels. Energy use is roughly 1.1–1.3 kWh per cycle. Black Friday pricing lands at $450–$650. The plastic-tub configurations should be avoided; the stainless versions are the ones worth buying.

Whirlpool Value Series

The entry Whirlpool machines sit near 50 dBA with 12–14 place settings and a plastic tub on the cheapest builds. Expect $380–$500 on sale. They are adequate for a utility kitchen or a rental, but the long-term value calculation is weak: plastic tubs degrade faster, racks rust sooner, and the machine will likely need replacing before a stainless-tub competitor bought at the same time.

Frigidaire Gallery Series

Frigidaire Gallery machines run about 49 dBA, hold 14 place settings, and include a third rack on most configurations plus an energy-saving cycle that uses under 1.0 kWh. Black Friday pricing typically falls to $500–$700. The strong point is the price-to-capacity ratio and widely available parts. The weak point is noise — at 49 dBA you will hear it from the next room.

Frigidaire Standard Series

The base Frigidaire models sit in the low 50s dBA with 12–14 place settings and a plastic tub on some builds. Black Friday pricing lands at $350–$500, which makes them the cheapest full-size built-ins worth considering. Buy one for a garage kitchen, a workshop or a rental unit; do not buy one for a room where people gather.

Sharp Dishwashers

Sharp’s built-in models run around 45 dBA with 14 place settings and a stainless tub, plus a third rack on higher configurations. Energy use sits near 1.0 kWh per cycle. Black Friday pricing tends to land at $500–$700. Availability is regional, so check that service is covered in your area before buying — the appliance is fine, but the service network is thinner than the major brands.

Beko Dishwashers

Beko machines sit in the mid 40s dBA with 14–15 place settings and, on several models, a built-in water softener — an unusual feature at this price and the single best fix for hard-water spotting. Energy use runs around 0.9–1.1 kWh per cycle. Black Friday pricing lands at $550–$800. Buy it if your water is hard and you do not want to spend Miele money.

Blomberg Dishwashers

Blomberg shares parentage with Beko and offers similar specifications with a slightly different feature mix, typically mid 40s dBA, 14 place settings, and a stainless tub. Pricing on sale runs $600–$850. The brand’s appeal is quiet operation and a compact lineup that includes 18-inch and ADA-height options.

Value Deals Under $550

The discount percentages here look dramatic, but the absolute savings are smaller and the long-term value is weaker. Buy in this band when the budget is fixed, the kitchen is secondary, or the machine is going into a rental.

IKEA RENODLAD

The mid-tier IKEA machine runs around 44 dBA with 14 place settings and a stainless tub, and it is designed to integrate with IKEA cabinetry and door fronts. Energy use is roughly 1.0 kWh per cycle. Pricing sits near $450–$550 with modest Black Friday movement. The advantage is integrated looks at a low price; the disadvantage is a shorter feature list and limited third-rack flexibility.

IKEA VÄLJANDE

A step down, this model runs about 47–49 dBA with 12–14 place settings and fewer rack adjustments. Pricing sits around $330–$420. It is a sensible choice for a rental kitchen or a secondary home where the machine runs a few times a week.

IKEA LAGAN

The entry model is a basic 12-setting machine in the low 50s dBA with a plastic tub on some builds. Pricing sits near $250–$330. It works, and it is inexpensive, but the service life is likely to be shorter than a stainless-tub machine that costs $200 more.

Hisense Built-In Dishwashers

Hisense’s 24-inch machines run around 47–50 dBA with 12–14 place settings and a stainless tub on higher configurations. Black Friday pricing lands at $350–$500. Parts and service coverage vary by region, so confirm local support before buying. Reasonable value for a rental or a starter home.

Midea and Comfee 24-Inch Models

These brands cover the entry price band at $300–$450 on sale, with 12–14 place settings and noise in the high 40s to low 50s dBA. Some configurations use plastic tubs. The realistic expectation is a five-to-eight-year appliance rather than a ten-year one, which is a fair trade at this price if you are furnishing a rental.

Element and Similar Value Brands

Value-brand 24-inch machines land at $280–$420 during Black Friday. They cover the basics — a normal cycle, a quick cycle, a heated dry — with 12 place settings and noise in the low 50s dBA. Check the warranty length carefully, because a one-year parts-and-labor term with no extended parts coverage is common here.

Compact, ADA and Specialty Deals

These categories discount the least because production volumes are small, but they are the only options that fit certain kitchens. If you need one, buy on specification rather than price.

Bosch 18-Inch Compact

An 18-inch Bosch holds about 8 place settings and runs in the mid 40s dBA with a stainless tub — unusual at this size, where most competitors use plastic. Energy and water use are proportionally lower, often under 0.8 kWh and about 2.8 gallons per cycle. The cutout is 18 inches wide by 22½ inches deep. Black Friday pricing lands at $650–$850. It is the best-built compact on the market and the right answer for a small apartment or a bar kitchen.

Beko 18-Inch Slimline

Beko’s compact holds 8–10 place settings, runs in the mid 40s to high 40s dBA, and offers a water softener on some models. Pricing on sale sits at $550–$750. Capacity is slightly better than most compacts, which matters if you are fitting full-size dinner plates.

Danby 18-Inch Built-In

Danby covers the budget compact band at $350–$500 with 8 place settings and noise in the low 50s dBA. Useful for a cottage, a basement bar or a rental studio where the machine is used lightly and noise is not critical.

Summit Appliance ADA and Compact Models

Summit builds ADA-height machines and compact units aimed at accessibility and multi-family housing, with front controls and 32¼–32½ inch heights. Pricing runs $600–$950. The specification is the reason to buy — few mainstream brands offer the full combination of ADA height, front controls and an 18-inch width.

Fisher & Paykel DishDrawer

Drawer dishwashers solve a specific problem: two independent drawers let you run a half load without guilt, and the drawer height means no bending. The double-drawer model holds about 14 place settings total, runs in the mid 40s dBA, and uses around 0.9–1.1 kWh per full drawer cycle. Pricing sits at $1,200–$1,700, with Black Friday movement typically $100–$200. Buy it for a small kitchen where a full-size door would block a walkway, or for a household with back problems. The trade-off is a smaller tub per drawer, so a roasting pan may not fit.

Panel-Ready Bosch 800 Series

Bosch offers the 800 Series platform with a fully integrated, panel-ready front. You supply the cabinet panel and handle, usually $150–$350, and you need to allow for a flush installation with adjustable legs across the 33⅞–35 inch range. Pricing runs $1,000–$1,300 for the appliance. It is the cleanest integrated look available below the custom-appliance tier.

KitchenAid Panel-Ready

KitchenAid’s panel-ready models share the FreeFlex rack system and stainless tub with the standard versions. Expect $900–$1,150 plus panel costs. The advantage over Bosch is a slightly larger capacity and a stronger bottle-wash feature; the disadvantage is marginally higher noise.

Thermador and Cove Panel-Ready

At the top of the integrated category, both brands offer full panel-ready fronts with flush installation and extremely quiet operation. Prices run $1,800–$2,600 with little seasonal discount. This is cabinetry-driven purchasing, not deal-hunting.

Countertop and Portable Dishwashers

For renters and anyone who cannot alter plumbing, portable full-size units on casters connect to the kitchen faucet and drain into the sink, while countertop units hold about six place settings and sit on the counter. Portable units run $450–$800, countertop models $250–$500. The limitations are real: portable machines occupy floor space, need to be rolled to the sink, and the faucet adapter must match your spout. Countertop models cannot take a full-size sheet pan. Still, they are the only option that installs in ten minutes with no cabinet work and no dedicated circuit.

How Black Friday Dishwasher Pricing Actually Works in 2026

Black Friday falls on November 27, 2026, with Cyber Monday on November 30. Appliance pricing does not follow the pattern of consumer electronics. Three things drive it.

• Model-year changeover. Manufacturers introduce new model years in the first quarter, so November and December are when the outgoing year is cleared. The discount is deepest on machines with a suffix that is about to change.
• Minimum advertised price. Many premium brands enforce a floor on advertised prices, which is why premium machines rarely show a dramatic cut on a website. The discount often appears instead as a free installation kit, free haul-away, a bundled second appliance rebate, or a gift card. Ask about these directly — they are frequently worth more than the visible price drop.
• Two dips, not one. The deepest pricing usually runs from the week before Black Friday through Cyber Monday, then a second, smaller wave hits in January when the new model year arrives. If you miss November, January clearance is the next real opportunity.

Budget accordingly: a mid-range machine that lists at $950 typically sells at $850 for most of the year, drops to $700–$800 during Black Friday week, and occasionally touches $650 on a doorbuster configuration with fewer features. A premium machine that lists at $1,300 rarely drops below $1,050. Set your target price from the year-round street price, not the list price — a “$400 off” tag on a machine that has been selling at $100 off for eleven months is a $300 discount, not a $400 one.

Installation, Delivery and Hidden Costs

Add these to your budget before you commit to a deal.

• Installation kit: $20–$45 for the supply line, drain hose clamp, high-loop bracket and fittings. Some dealers include it.
• Power cord kit: $25–$40 if the machine is not hardwired. Many units ship without one.
• Professional installation: $130–$250 for a straight swap with an existing connection. Add $100–$300 if you need a new circuit, a new shutoff valve, or cabinet modification.
• Haul-away: often free with delivery, otherwise $25–$50.
• Panel and handle kit for panel-ready models: $150–$350.
• Cabinet modification: $150–$500 if your opening is narrower than 24 inches or the countertop needs trimming.
• New dedicated circuit: $250–$600 if the existing wiring is shared or undersized.
• Utility rebate: $25–$75 back on qualifying efficient models — worth ten minutes of paperwork.

If you are replacing a machine that has been in place for a decade, expect one surprise: the shutoff valve under the sink. Old multi-turn valves seize, and a plumber replacing one runs $150–$300. Replacing the valve proactively while the dishwasher is out is cheaper than discovering the problem mid-installation.

FAQ

Are Black Friday dishwasher deals genuinely cheaper?

Yes, but modestly. Real discounts run 15–30 percent off the year-round street price for mid-range machines, and 10–20 percent for premium ones. The best strategy is to record the street price in early November, then compare against the Black Friday price rather than against the list price.

Will a 24-inch dishwasher fit my existing opening?

Measure the opening at its narrowest point, not at the front. The cutout needs at least 23⅝ inches of clear width, 24 inches of depth and 34 inches of height. Countertops are often installed slightly out of square, so measure at the top, middle and bottom of the opening.

Do dishwashers come with a power cord?

Most built-in models do not. They are designed to be hardwired into a junction box behind the toe kick. If you want to plug into an outlet under the sink, buy the manufacturer’s cord kit separately, usually $25–$40.

Do I need a dedicated circuit?

Yes, in almost all cases. The heating element can draw 10–12 amps, and sharing a circuit with a disposal or a microwave will trip breakers. If your kitchen only has a shared 20-amp circuit, budget for an electrician.

Is a third rack worth paying for?

Only the full-depth kind with its own spray arm. A shallow utensil-only rack frees the silverware basket space but adds little capacity. A full-depth rack with a dedicated wash tube is worth roughly $100–$150 of the price difference and genuinely changes how much you fit per load.

How long should a dishwasher last?